Details

EK-Cryofuel Loop Superflush is a solution made to flush out manufacturing residues, impurities, and leftover chemicals. It can be used either as a stand-alone solution or after the EK-CryoFuel Loop Cleaner.

Stand-alone - prepares a new, unused loop for a new coolant and extends its life, improves stability, and reduces soft tube yellowing. 

Follow up - after using EK-CryoFuel Loop Cleaner to clean gunk and old coolant, Superflush is used to pick up and rinse any residue chemicals left from the cleaner.

The concentrate is to be mixed with approximately 2750ml of distilled water (1:11 ratio). This solution does not act as a corrosive inhibitor or biocide for coolants. Compatible with all EK soft and hard tubing. 

Details

EK-Cryofuel Loop Cleaner is a liquid cooling system and radiator cleaner. The purpose of the EK-Cryofuel Loop Cleaner is to clean your existing loop before pouring in new coolant or to prepare a new, unused custom loop fully. It removes any manufacturing residues, impurities, and old coolant stains.

This is not a stand-alone product as it requires a subsequent use of the Superflush solution to pick up any residue from the cleaner and ensure maximum stability of your new coolant. It can improve the performance of your water cooling system.

EK-Cryofuel Loop Cleaner comes as a concentrate in a 250ml bottle and should be mixed with 1250ml (1:5 ratio) of distilled water before use. It is poured into an empty water-cooling system and left to circulate from 2 to 24 hours. This solution does not act as a corrosive inhibitor or biocide for coolants. It should not be left in the system for periods significantly longer than suggested.

Compatible with all EK soft and hard tubing. 

PLEASE NOTE:

This is NOT a stand-alone product, EK-CryoFuel Superflush must be used to clean out any residue chemicals from the loop.

If you're going from one colored coolant to another color, you need to first flush your loop with distilled water before using the EK-CryoFuel Loop Cleaner